Official Forum of the North Carolina FJ Cruisers
 
HomePortalCalendarFAQSearchRegisterLog in

Share | 
 

 DIY Pistol Mount

View previous topic View next topic Go down 
Goto page : 1, 2, 3  Next
AuthorMessage
CarolinaCruiser15
MODERATOR - Trail Guide
MODERATOR - Trail Guide


Posts: 1498
Points: 2002
Join date: 2011-05-09
Age: 30
Location: Raleigh, NC

PostSubject: DIY Pistol Mount   Fri Aug 12, 2011 8:24 pm

Only applicable to those who have a CCW (Concealed Carry Weapon) permit!!!!

I have two pistols (Springfield Armory XD9 w/ 4" barrel and a Berreta PX4 Storm Subcompact 9mm). The Springfield I keep at home with the laser and light attached and the Berreta is my CCW piece.

I previously kept the Berreta in the console on the dash in front of the driver, but realized that in an emergency situation it actually isnt the most practical location. Good for storage bad for real life use.

After much thought, I came up with this idea and it cost me all of $18 at Wally World. Its a universal holster, which is great in case I decide to carry the Springfield or even if I decide to get a different gun. It has a thumb break to keep it secure and also holds an extra magazine. I also didnt want to drill any holes.

The holster is ambidextrous and all you have to do is switch everything around (if youre a righty) to the lefty position. It attaches with the belt clip right under the steering wheel and is pretty firm. Again, if youre a righty, in order to draw with your right hand from the drivers seat, you have to FLIP AROUND THE CLIP AND THUMB BREAK on the holster as if you were a lefty.

So far its secure, BARELY visible (the gun comes with me when I leave the FJ), EASILY accessible and costs a fraction of the cost of a fancy gun-specific holster. Oh yeah, and NO HOLES TO DRILL!!








_________________
2007 Black Cherry FJ
Sylvania Silverstar Ultra Headlights : PIAA Fogs on OEM Brush Guard: Bandi Mount w/ 4' Firestik : Axe/Shovel Mount : GY Duratracs 285/70/17 : Bushwacker Fender Flares : Pioneer headunit : 12" Infinity Sub : GOBI Ladder : Blackout Hood Decal : LED Dome Lights : ARB Full Rack : Safari Snorkel w/ "Scuba Mod" : LED backup lights : Rough Country front lift w/ Day Star rear spacers : Flowmaster : LED Mirror Lights : Ricochet front and LCA skids : XD Spy wheels

email: villegas15@gmail.com

]
Back to top Go down
View user profile https://www.facebook.com/rolando.villegas
ncorn38
MODERATOR - Trail Scout
MODERATOR - Trail Scout


Posts: 261
Points: 645
Join date: 2011-05-09
Location: Kannapolis NC

PostSubject: Re: DIY Pistol Mount   Fri Aug 12, 2011 9:32 pm

I like that! Is it just clipped to the plastic under the steering wheel? Does it pull or damage the plastic? And does it go on and off easy? I usually carry a Glock 27 and ive been looking for a simple way to mount it without drilling holes and I think you may have just found it!

_________________
2007 Titanium Metallic, 3inch rough country, 285/70/17 BFG All Terrain TA KO, Bajarack roof rack insert, Ricochet front bash plate and engine skid, OEM rock rails, A-Trac, Rear Diff Lock, Wet Okole Front Seat Covers, Bandi mount with 4ft Firestik, Midland 75-822 portable CB, Rear left cubby PSD(blue), blue Toyota grill emblem, Rear Diff "Scuba" Mod

Back to top Go down
View user profile http://www.facebook.com/people/Nick-Aaron-Corn/100000272912625
CarolinaCruiser15
MODERATOR - Trail Guide
MODERATOR - Trail Guide


Posts: 1498
Points: 2002
Join date: 2011-05-09
Age: 30
Location: Raleigh, NC

PostSubject: Re: DIY Pistol Mount   Fri Aug 12, 2011 9:37 pm

ncorn38 wrote:
I like that! Is it just clipped to the plastic under the steering wheel? Does it pull or damage the plastic? And does it go on and off easy? I usually carry a Glock 27 and ive been looking for a simple way to mount it without drilling holes and I think you may have just found it!


Thanks! Yup, it just clips onto that plastic piece. It doesnt slide all the way back but the clip is pretty strong... it took a little prying to get it over the lip of that plastic piece.

Doesnt seem to scratch or damage anything and if it does (long term), it would be the inside of the plastic piece under the steering wheel.. I dont plan on ever looking in there anyway. lol. Seriously though, I think I hit the jackpot. LOL. Your glock is also smaller/lighter than my Berreta so itll probably be even easier to draw.

_________________
2007 Black Cherry FJ
Sylvania Silverstar Ultra Headlights : PIAA Fogs on OEM Brush Guard: Bandi Mount w/ 4' Firestik : Axe/Shovel Mount : GY Duratracs 285/70/17 : Bushwacker Fender Flares : Pioneer headunit : 12" Infinity Sub : GOBI Ladder : Blackout Hood Decal : LED Dome Lights : ARB Full Rack : Safari Snorkel w/ "Scuba Mod" : LED backup lights : Rough Country front lift w/ Day Star rear spacers : Flowmaster : LED Mirror Lights : Ricochet front and LCA skids : XD Spy wheels

email: villegas15@gmail.com

]
Back to top Go down
View user profile https://www.facebook.com/rolando.villegas
ncorn38
MODERATOR - Trail Scout
MODERATOR - Trail Scout


Posts: 261
Points: 645
Join date: 2011-05-09
Location: Kannapolis NC

PostSubject: Re: DIY Pistol Mount   Fri Aug 12, 2011 9:40 pm

Yep I think it will work perfect ill post some pics when I get it up there. Good job, good find.

_________________
2007 Titanium Metallic, 3inch rough country, 285/70/17 BFG All Terrain TA KO, Bajarack roof rack insert, Ricochet front bash plate and engine skid, OEM rock rails, A-Trac, Rear Diff Lock, Wet Okole Front Seat Covers, Bandi mount with 4ft Firestik, Midland 75-822 portable CB, Rear left cubby PSD(blue), blue Toyota grill emblem, Rear Diff "Scuba" Mod

Back to top Go down
View user profile http://www.facebook.com/people/Nick-Aaron-Corn/100000272912625
CarolinaCruiser15
MODERATOR - Trail Guide
MODERATOR - Trail Guide


Posts: 1498
Points: 2002
Join date: 2011-05-09
Age: 30
Location: Raleigh, NC

PostSubject: Re: DIY Pistol Mount   Fri Aug 12, 2011 9:43 pm

Great! Cant wait to see your pics! Thanks man Smile

_________________
2007 Black Cherry FJ
Sylvania Silverstar Ultra Headlights : PIAA Fogs on OEM Brush Guard: Bandi Mount w/ 4' Firestik : Axe/Shovel Mount : GY Duratracs 285/70/17 : Bushwacker Fender Flares : Pioneer headunit : 12" Infinity Sub : GOBI Ladder : Blackout Hood Decal : LED Dome Lights : ARB Full Rack : Safari Snorkel w/ "Scuba Mod" : LED backup lights : Rough Country front lift w/ Day Star rear spacers : Flowmaster : LED Mirror Lights : Ricochet front and LCA skids : XD Spy wheels

email: villegas15@gmail.com

]
Back to top Go down
View user profile https://www.facebook.com/rolando.villegas
NC FJ Driver
Tail Gunner
Tail Gunner


Posts: 737
Points: 1122
Join date: 2011-05-09
Age: 49
Location: Raeford, NC

PostSubject: Re: DIY Pistol Mount   Sat Aug 13, 2011 8:51 am

Nice! I like it.Very Happy
Back to top Go down
View user profile
Scottydog
MODERATOR & SUPPORTING MEMBER
MODERATOR & SUPPORTING MEMBER


Posts: 576
Points: 1093
Join date: 2011-05-10
Age: 49
Location: Raleigh, NC

PostSubject: Re: DIY Pistol Mount   Tue Aug 16, 2011 10:08 pm

Great idea. I was looking at an under the steering wheel holster on-line for like $50...thiiseems much easier and certainly cheaper. I just took my CCH class 2 weeks ago and have my paperwork in. Guess it takes 4-6 weeks for the permit. My OD Green XDM 9 doesn't do much good locked away in the back of my FJ...

_________________
2008 Silver FJ
Bilstein 5100s Front, OME Rear Springs Rear, 285/70/17 Falken Rocky Mountain ATS, OEM Brush Guard, OEM Sliders, K&N Drop-in, Hot 12v Outlet, Custom FJammer, LED Dome Lights, MPac Rear Door Storage, Orange Boxx Custom P.S.D. Rear Side Storage, Fourtreks Hi-Lift Mount, Custom Shovel/Axe Mount, Blacked-out Emblems, Scuba Driver Mod, Smittybilt Air Compressor, Midland 75-822 CB with 4' Firestik on Bandi Mount, Sylvania Silverstar Ultra Headlights


To-do List (Growing again):
Flowmaster Exhaust
Bilstein Rear Shocks
Skids
Tinted front windows
Off-Road Lights
Cold Air Intake
Back to top Go down
View user profile
David B
ADMINISTRATOR
ADMINISTRATOR


Posts: 1884
Points: 2844
Join date: 2011-05-01
Age: 39
Location: Wake Forest, NC

PostSubject: Re: DIY Pistol Mount   Tue Aug 16, 2011 10:14 pm

Great job Rolando! Awesome find! I like it!

_________________
Contact Info: dbronson@ncfjcruisers.com

Follow me on Twitter: @NCFJ_Cruisers1

NCFJ Cruisers YouTube Channel: http://www.youtube.com/NCFJCruisers

2010 Trail Teams Edition - PIAA XTreme White Plus headlights, PIAA 520 series Fog/Driving lights, 2010 BudBuilt Front Skid - painted ORANGE, BudBuilt engine skid - HighHeat Black, Ricochet LCA guards - ORANGE, BajaRack OEM roofrack basket, MaxTrax recovery ramps, Husky Floor Liners, Midland 75-822 40 Channel 2 Way Radio, Bandi Mount with 4' Firestick II, OrangeBoxx Side Cubby PSD (NCFJ Edition), Outrider Suspension armor, K&N drop in airfilter for on-road travel, OEM Airfilter when wheeling.....
Back to top Go down
View user profile http://forum.ncfjcruisers.com
Scottydog
MODERATOR & SUPPORTING MEMBER
MODERATOR & SUPPORTING MEMBER


Posts: 576
Points: 1093
Join date: 2011-05-10
Age: 49
Location: Raleigh, NC

PostSubject: Re: DIY Pistol Mount   Tue Aug 16, 2011 10:18 pm

Steering mount




_________________
2008 Silver FJ
Bilstein 5100s Front, OME Rear Springs Rear, 285/70/17 Falken Rocky Mountain ATS, OEM Brush Guard, OEM Sliders, K&N Drop-in, Hot 12v Outlet, Custom FJammer, LED Dome Lights, MPac Rear Door Storage, Orange Boxx Custom P.S.D. Rear Side Storage, Fourtreks Hi-Lift Mount, Custom Shovel/Axe Mount, Blacked-out Emblems, Scuba Driver Mod, Smittybilt Air Compressor, Midland 75-822 CB with 4' Firestik on Bandi Mount, Sylvania Silverstar Ultra Headlights


To-do List (Growing again):
Flowmaster Exhaust
Bilstein Rear Shocks
Skids
Tinted front windows
Off-Road Lights
Cold Air Intake
Back to top Go down
View user profile
Scottydog
MODERATOR & SUPPORTING MEMBER
MODERATOR & SUPPORTING MEMBER


Posts: 576
Points: 1093
Join date: 2011-05-10
Age: 49
Location: Raleigh, NC

PostSubject: Re: DIY Pistol Mount   Tue Aug 16, 2011 10:21 pm

Link FYI



http://www.gumcreekcustoms.com/

_________________
2008 Silver FJ
Bilstein 5100s Front, OME Rear Springs Rear, 285/70/17 Falken Rocky Mountain ATS, OEM Brush Guard, OEM Sliders, K&N Drop-in, Hot 12v Outlet, Custom FJammer, LED Dome Lights, MPac Rear Door Storage, Orange Boxx Custom P.S.D. Rear Side Storage, Fourtreks Hi-Lift Mount, Custom Shovel/Axe Mount, Blacked-out Emblems, Scuba Driver Mod, Smittybilt Air Compressor, Midland 75-822 CB with 4' Firestik on Bandi Mount, Sylvania Silverstar Ultra Headlights


To-do List (Growing again):
Flowmaster Exhaust
Bilstein Rear Shocks
Skids
Tinted front windows
Off-Road Lights
Cold Air Intake
Back to top Go down
View user profile
CarolinaCruiser15
MODERATOR - Trail Guide
MODERATOR - Trail Guide


Posts: 1498
Points: 2002
Join date: 2011-05-09
Age: 30
Location: Raleigh, NC

PostSubject: Re: DIY Pistol Mount   Wed Aug 17, 2011 12:00 am

Scottydog wrote:
Great idea. I was looking at an under the steering wheel holster on-line for like $50...thiiseems much easier and certainly cheaper. I just took my CCH class 2 weeks ago and have my paperwork in. Guess it takes 4-6 weeks for the permit. My OD Green XDM 9 doesn't do much good locked away in the back of my FJ...


Yeah, I saw a few of those as well. For $18 bucks and to not have to wait for the mail, I figured Id try this. Ive been driving around and Im actually pretty impressed. It hasnt budged at all and you can draw very easily. I just leave the holster in there and carry my Berreta with me. The XD9 with the laser/light stays by the bed Wink

Congrats on finishing up the CCW class! The Sheriffs dept said it would take 30-90 days for the permit to come in and Ill be damned if they didnt take every bit of those days. I hope yours comes sooner!!!

Cant wait to see pics of your OD XD with the new setup!!

_________________
2007 Black Cherry FJ
Sylvania Silverstar Ultra Headlights : PIAA Fogs on OEM Brush Guard: Bandi Mount w/ 4' Firestik : Axe/Shovel Mount : GY Duratracs 285/70/17 : Bushwacker Fender Flares : Pioneer headunit : 12" Infinity Sub : GOBI Ladder : Blackout Hood Decal : LED Dome Lights : ARB Full Rack : Safari Snorkel w/ "Scuba Mod" : LED backup lights : Rough Country front lift w/ Day Star rear spacers : Flowmaster : LED Mirror Lights : Ricochet front and LCA skids : XD Spy wheels

email: villegas15@gmail.com

]
Back to top Go down
View user profile https://www.facebook.com/rolando.villegas
CarolinaCruiser15
MODERATOR - Trail Guide
MODERATOR - Trail Guide


Posts: 1498
Points: 2002
Join date: 2011-05-09
Age: 30
Location: Raleigh, NC

PostSubject: Re: DIY Pistol Mount   Wed Aug 17, 2011 12:02 am

Scottydog wrote:
Steering mount





Looks good!!!

I do like the bottom strap. Id check out eBay.... see if its on there for a bit cheaper.

_________________
2007 Black Cherry FJ
Sylvania Silverstar Ultra Headlights : PIAA Fogs on OEM Brush Guard: Bandi Mount w/ 4' Firestik : Axe/Shovel Mount : GY Duratracs 285/70/17 : Bushwacker Fender Flares : Pioneer headunit : 12" Infinity Sub : GOBI Ladder : Blackout Hood Decal : LED Dome Lights : ARB Full Rack : Safari Snorkel w/ "Scuba Mod" : LED backup lights : Rough Country front lift w/ Day Star rear spacers : Flowmaster : LED Mirror Lights : Ricochet front and LCA skids : XD Spy wheels

email: villegas15@gmail.com

]


Last edited by CarolinaCruiser15 on Wed Aug 17, 2011 12:04 am; edited 1 time in total
Back to top Go down
View user profile https://www.facebook.com/rolando.villegas
CarolinaCruiser15
MODERATOR - Trail Guide
MODERATOR - Trail Guide


Posts: 1498
Points: 2002
Join date: 2011-05-09
Age: 30
Location: Raleigh, NC

PostSubject: Re: DIY Pistol Mount   Wed Aug 17, 2011 12:02 am

David B wrote:
Great job Rolando! Awesome find! I like it!


Thanks David!!!

_________________
2007 Black Cherry FJ
Sylvania Silverstar Ultra Headlights : PIAA Fogs on OEM Brush Guard: Bandi Mount w/ 4' Firestik : Axe/Shovel Mount : GY Duratracs 285/70/17 : Bushwacker Fender Flares : Pioneer headunit : 12" Infinity Sub : GOBI Ladder : Blackout Hood Decal : LED Dome Lights : ARB Full Rack : Safari Snorkel w/ "Scuba Mod" : LED backup lights : Rough Country front lift w/ Day Star rear spacers : Flowmaster : LED Mirror Lights : Ricochet front and LCA skids : XD Spy wheels

email: villegas15@gmail.com

]
Back to top Go down
View user profile https://www.facebook.com/rolando.villegas
Scottydog
MODERATOR & SUPPORTING MEMBER
MODERATOR & SUPPORTING MEMBER


Posts: 576
Points: 1093
Join date: 2011-05-10
Age: 49
Location: Raleigh, NC

PostSubject: Re: DIY Pistol Mount   Wed Aug 17, 2011 8:50 am

Just stopped by Wally World and picked up the Blackhawk...seems like it will work great. I will probably modify the clip to better fit over the plastic and try to make it fit closer to the column.

Thanks for the tip...

My OD XDm


_________________
2008 Silver FJ
Bilstein 5100s Front, OME Rear Springs Rear, 285/70/17 Falken Rocky Mountain ATS, OEM Brush Guard, OEM Sliders, K&N Drop-in, Hot 12v Outlet, Custom FJammer, LED Dome Lights, MPac Rear Door Storage, Orange Boxx Custom P.S.D. Rear Side Storage, Fourtreks Hi-Lift Mount, Custom Shovel/Axe Mount, Blacked-out Emblems, Scuba Driver Mod, Smittybilt Air Compressor, Midland 75-822 CB with 4' Firestik on Bandi Mount, Sylvania Silverstar Ultra Headlights


To-do List (Growing again):
Flowmaster Exhaust
Bilstein Rear Shocks
Skids
Tinted front windows
Off-Road Lights
Cold Air Intake
Back to top Go down
View user profile
CarolinaCruiser15
MODERATOR - Trail Guide
MODERATOR - Trail Guide


Posts: 1498
Points: 2002
Join date: 2011-05-09
Age: 30
Location: Raleigh, NC

PostSubject: Re: DIY Pistol Mount   Wed Aug 17, 2011 9:28 am

Nice looking Springfield! I always liked the OD. Let me know how your modification turns out... I might have to copy you if it works well!!! Wink

_________________
2007 Black Cherry FJ
Sylvania Silverstar Ultra Headlights : PIAA Fogs on OEM Brush Guard: Bandi Mount w/ 4' Firestik : Axe/Shovel Mount : GY Duratracs 285/70/17 : Bushwacker Fender Flares : Pioneer headunit : 12" Infinity Sub : GOBI Ladder : Blackout Hood Decal : LED Dome Lights : ARB Full Rack : Safari Snorkel w/ "Scuba Mod" : LED backup lights : Rough Country front lift w/ Day Star rear spacers : Flowmaster : LED Mirror Lights : Ricochet front and LCA skids : XD Spy wheels

email: villegas15@gmail.com

]
Back to top Go down
View user profile https://www.facebook.com/rolando.villegas
 

DIY Pistol Mount

View previous topic View next topic Back to top 
Page 1 of 3Goto page : 1, 2, 3  Next

 Similar topics

-
» Pistol punch
» June 30 - July 1, 2012 :: CCW and Tactical Pistol 1 Course
» DIY Pistol Mount
» SOLD: Ziegel Engineering Pistol Box
» Airtec's Mondeo Mk3 2.2 Turbo Diesel front mount Intercooler upgrade

Permissions in this forum:You cannot reply to topics in this forum
NCFJ Cruisers :: Product Reviews :: Miscellaneous-